How to Debug and Maintain Self Contained Concrete Mixer Truck

The self contained concrete mixer truck will lead you into the automated concrete production. Owning a self-loading mixer truck is equivalent to owning a loader, concrete mixer, concrete truck and more than 6 workers. High-tech program settings, scientific body structure, and accurate electronic scales can mix 4 cubic meters of concrete in 12 minutes, resulting in low investment and high returns.

Advantages of self loading concrete mixer truck

1. Automatic feeding and water supply.

2. It is suitable for different terrains and does not rely on power equipment.

3. A high discharging speed of one batch in an average of 5 minutes.

4. There are rich models for you to choose from. The popular models are 2 cubic, 3.5 cubic and 4 cubic.

How to debug self loading concrete mixer

1. All components, accessories and random tools of the equipment to be debugged should be fully equipped according to standards.

2. Prepare hydraulic oil and lubricating grease. The quality of the hydraulic oil should meet the requirements.

3. Add hydraulic oil, fuel, lubricating oil and cooling water according to regulations, and add hydraulic oil to the specified oil level.

How to maintain the self loading transit mixer

Brake pads and brake discs: Brake pads will wear during use, which will cause the braking effect to weaken and need to be replaced in time. At the same time, if the brake disc is cracked or deformed, it also needs to be replaced.

Tires: The self loading mobile concrete mixer is a heavy-duty vehicle that often drives on potholed and rugged roads. The tires are prone to wear and need to be replaced regularly.

Engine oil and oil filter: The engine is the core component of the mixer truck. The oil and oil filter need to be replaced regularly to ensure normal engine lubrication.

Air filter, fuel filter and hydraulic oil filter: These filters can prevent impurities from entering the engine, hydraulic system and fuel system, ensuring the normal operation of the mixer truck.

Oil seals and bearings: Oil seals and bearings are key components of the self loading concrete mixer and need to be replaced regularly to avoid oil leakage, wear and other problems.

Brake Fluid: Brake fluid is a liquid medium that transmits braking pressure in a self loading concrete mixer's hydraulic braking system. Since the brake hydraulic system must connect the brake fluid to the atmosphere to operate normally, long-term operation will cause the brake fluid to absorb moisture at high temperatures and turn into bubbles, resulting in a decrease in braking speed and efficiency of the mixer truck. Therefore, for safety reasons, drivers should check the brake fluid regularly and replace it in time. It is recommended to replace it every two years or 50,000 kilometers.

Original Source: https://www.self-loading-mixer.com/a/how-to-debug-and-maintain-self-contained-concrete-mixer-truck.html

Tags: self loading concrete mixer truck

Prev: What are Spotlights of Self Propelled Concrete Mixer for Sale

Next: What Are Standard Operation Steps of Self Loading Mixer Truck

Category

Relate Blogs

CONTACT US