The Self Loading Concrete Mixer for Rent

The self loading concrete mixer is an ideal small concrete construction equipment for renting due to four wheel drive. The main special parts of the self loading concrete mixer rent include retarder, front and rear support frames of the mixing drum, reducer, hydraulic transmission system, mixing drum, control mechanism, cleaning system, etc.

How to judge whether the self loading concrete mixer truck has completed unloading：

1. Inspection method of pressure gauge: When the self loading mixer is unloading, the air pressure in the tank is 1.8~2.4 kg/cm2. When the unloading is about to end, the air pressure drops rapidly. If the pressure gauge drops to 0-0.2 kg/cm2, it proves that the concrete in the tank is basically unloaded.

2. Sound of the air compressor: The load of the air compressor is large during normal unloading, and the sound made by the air compressor when working is relatively dull. When the tank unloading is completed, the load of the air compressor becomes smaller and the working sound becomes crisp.

3. Knocking on the tank: During the concrete unloading process, you can tap the tank with your hands. If there is no echo, it means that there is a lot of concrete left in the tank and it will take some time to unload. If there is an echo in the tank, it means that the concrete in the tank is almost finished.

4. Observation method of the unloading hose: During normal discharge, the discharge hose is impacted by the concrete and the hose continues to shake. If the hose stops shaking, it also proves that the concrete in the tank has basically been discharged.

Issues that should be paid attention to when reducing the wear of self loading transit mixer:

1. Maintain the rated load

The nature and size of the load on such construction machinery and equipment have a significant impact on the loss of equipment parts. Generally, the wear of mechanical parts increases as the load increases.

2. Clean in time

Mechanical impurities usually refer to materials generated by construction machinery during use, such as dust, soil and some metal shavings, grease stains, etc. Once these impurities reach between the working surfaces of a machine, they can be very harmful: not only does it increase friction, but it also increases fuel consumption.

3. Prevent corrosion of self-loading mixer truck parts

Corrosion acts on parts and is sometimes not easy to detect, easily overlooked, and more harmful. Rainwater, chemicals in the air, etc. seep into the machine through the pipes and gaps of the machine parts and corrode the parts.

Continuing to work with corroded parts will also accelerate machine wear and increase mechanical failure. This requires managers and operators to make reasonable construction arrangements based on the prevailing weather conditions and site conditions to minimize the harm of chemical corrosion to mechanical parts.

4. Maintain reasonable temperatures of equipment components

During operation, each component's temperature has its own normal range. Too high or too low temperature will affect the strength of parts, so be sure to use coolant and lubricating oil to control the temperature of certain parts so that they can work within a reasonable temperature range.

Haomei Machinery has rich models of self loading concrete mixers. Welcome to leave message below to inquire the self concrete mixer machine price from us.

Original Source: https://www.self-loading-mixer.com/a/the-self-loading-concrete-mixer-for-rent.html

Tags: self loading concrete mixer truck

Prev: What Is Self Loading Concrete Mixer HS Code

Next: A Rough Terrain Concrete Mixer: Self Concrete Mixer Truck

Category

Relate Blogs

CONTACT US