A Self Loading Mixer Truck In Global Projects

2024-11-22

The self loading concrete mixer machine is a kind of equipment used for mixing and transporting concrete on site. Owning a self-loading mixer truck is equivalent to owning a loader, concrete mixer, conveyor and more than 6 workers. With high-tech program settings, scientific body structure, and precise electronic scales, 4 cubic meters of concrete can be mixed in 12 minutes. It is widely used in global projects.

self loading concrete mixer machine.jpg

Africa: Overseas power transmission lines

This project features long line, large foundation number and small single foundation concrete volume. Most of the line paths are far from the main highway, and the construction period experiences two rainy seasons. Machinery with strong off-road performance is required to ensure construction efficiency. The self loading concrete mixer truck is of four wheel drive.

Europe: All terrain projects

The European Union has 27 member states, including plains, plateaus, mountains, river valleys, and strait coasts. Some construction companies often alternate construction between member states, with large terrain spans and expensive labor. The self loading concrete mixer can runs stably at a steep inclined terrains.

China: Rural road construction

Many roads are only 3.5 meters wide, and many large vehicles are inconvenient to drive. However, our small self loading mobile concrete mixer can not only come and go freely, but also reduce a lot of manpower. For example, a road of 3.5 meters should have required a lot of manpower (loading, unloading, transporting materials back and forth, and paving the road). These all require manual labor, but after using a small automatic loading mixer truck, only one person is needed to operate the machine, and 2-3 people are needed to pave the road. A project saves at least two-thirds of the labor. Therefore, a small self loading mixer truck is still very suitable for road construction.

Philippines: ground consolidation

The self loading transit mixer can load materials by themselves. Most self loading mixer trucks on the market are equipped with automatic weighing systems. The raw material ratios for producing concrete can be scientifically calculated, and the concrete mixed according to the standard amount of raw materials is of better quality. Such concrete is applied to floor projects, and the working surface is compacted and leveled.

A can of material can be produced in more than ten minutes, with high efficiency and low cost. After mixing, the 270-degree discharge port can unload concrete at various angles of the construction site, and then it can be flattened by the machine.